20.02.2023
Reduction of substances hazardous to health and the environment
In our product innovations, we pay particular attention to using raw materials that are not harmful to health or the environment.
search
20.02.2023
In our product innovations, we pay particular attention to using raw materials that are not harmful to health or the environment.
20.02.2023
We are constantly working to improve the safety aspects of existing and new product developments.
20.02.2023
Through enhanced cutting ability and new benchmarks, we are not only delivering competitive advantages to our customers, we are also saving energy and resources on site.
20.02.2023
Significant energy savings have been achieved in the production of cutting segments and diamond wires.
20.02.2023
On 7 October 2022, the "Clean the Jizera River" clean-up event was held in the Czech Republic for the fifth time.
20.02.2023
Given the disproportionate rise in energy costs in recent months, Tyrolit has responded in a number of ways to reduce additional costs as far as possible.
20.02.2023
Since 15 June 2022, three emission-free e-trucks from MAN have been handling internal transport between our plants in Schwaz, Stans and Vomp.
20.02.2023
The first parts of the large-scale photovoltaic system at our Schwaz site have been in operation since August.
17.02.2023
The respective structure of the ski base and the edge influence the gliding and carving characteristics of the ski and, perfectly prepared, are an important success factor for the racers.
22.11.2022
Extensive training. Continuous support. Perfect results.
21.09.2022
Since August, the first parts of the large-scale photovoltaic system at Tyrolit's Schwaz site have been in operation.
21.06.2022
From 15 June 2022, three emission-free e-trucks from MAN will handle internal transport between the Tyrolit plants in Schwaz, Stans and Vomp.
10.02.2022
In the Swiss Rhine Valley, a privately owned castle is currently being reconstructed, with the façade of the historic building to be reproduced as faithfully as possible. This is the only way to ensure a harmonious architectural impression of the castle, the ruin and the new building.
22.12.2021
With over 4,000 employees, TYROLIT is one of the world's largest grinding technology companies. The successful economic positioning and stable financial situation are a good time for a change at the helm of the company.
17.12.2021
In autumn 2021, BM Manfred Gratz GmbH was commissioned to carry out drilling in the tunnel systems and at the dam wall of the ÖBB-Infrastruktur AG in the Glacier World Weißsee. The aim was to ensure the drainage of the mountain with deep boreholes of up to 28 m to increase the stability of the Amersee dam.
13.12.2021
Repeatedly pronounced dead, HSS tools nevertheless always experience a revival and are also able to hold their own against competition from outside the EU. The development of powder-metallurgical HSS steels in particular has brought a leap in tool performance.
25.11.2021
Every two years, Bosch honours its best suppliers from around the world. In 2021, TYROLIT became the first abrasives manufacturer in history to receive the Global Supplier Award from ROBERT BOSCH AG. This recognition is all the more remarkable when you consider that this year a total of only 46 suppliers out of several thousand were selected from all categories.
09.11.2021
For two months at the beginning of 2021, an artificial lake in Milan, Italy, was the setting for another spectacular use of TYROLIT drilling equipment.
29.10.2021
Technology and education have always been closely linked and drive each other’s progress. As a market leading system and solutions provider, it has been our goal to stay ahead of the curve on both fronts for more than 100 years.
22.03.2021
At the start of this season, TYROLIT entered into an official partnership with the ÖSV (Austrian Ski Association) in the areas of service and technology. There have already been numerous points of contact between the two organisations for some time.
25.01.2021
TYROLIT developed the ultimate solution to process laminated glass in an effective way, by equally reducing stress to the tool and the work piece.
14.12.2020
In the end of July 2020, the TYROLIT Group acquired Bibielle S.p.A. – a leading manufacturer of high quality three-dimensional abrasive material – closing the product gap in surface conditioning.
09.12.2020
Quay 66 in the Bremerhaven port area was built in 1963 and was used as a landing stage for the former England ferry. The quay is located in the entrance to the northern lock of the port and is passed by about 2,000 ships a year. Over the years, it has been rammed by ships several times and was recently severely damaged by a car transporter.
02.12.2020
Czech construction company TRETINA s.r.o., based in Brno, has been convinced of TYROLIT quality tools and machines for many years. They have already completed numerous projects with products of the Austrian system supplier for the construction industry.
18.11.2020
TYROLIT has adapted to the circumstances and over the last few months has positioned itself well to deal with the continuing restrictions in the best possible way and to ensure uninterrupted product availability.
15.09.2020
TYROLIT develops and produces systems for the processing of large concrete and asphalt surfaces in cooperation with its US subsidiary Diamond Products: The product range includes grinding and grooving machines as well as tools that are optimally adapted to the corresponding applications and performance classes.
08.07.2020
In Germany, many wind power plants have currently to be renewed. On the one hand to increase productivity, on the other hand, due to the extreme wear and tear caused by their exposure.
07.04.2020
In a brick factory in the region of Tula, Russia, the steel shaft of a clay mixer was broken. DIAMONDTECH CONSTRUCTION had to remove a stuck steel shaft. After 11 hours of work and seven re-grindings, the pure steel shaft was loose and the stuck shaft with a length of 60 cm was removed successfully.
06.04.2020
As the whole world is dealing with the social and economic consequences of the global COVID-19 crisis, so too is TYROLIT.
02.04.2020
The Vessel is an iconic structure and landmark built with the help of TYROLIT tools as part of the Hudson Yards renovation project in Manhattan, New York City.
31.03.2020
In autumn 2019, a total of 52,000 m2 of concrete pavement (old concrete) was ground off the A8 motorway between the Dasing and Dachau/Fürstenfeldbruck junctions in order to improve the grip of the surface.
20.03.2020
Super-thin cut-off wheels are, in our opinion, the most important product group on
the market. For the product management team in the Industrial Trade division it was
therefore crucial that TYROLIT – as the inventor of super-thin cut-off wheels – continue to offer the best products in terms of cutting ability and lifetime on the market in the long term.
11.03.2020
TYROLIT – Abrasives manufacturer TYROLIT tailors the ToolScope assistance system to specific grinding requirements. The system provides a transparent view of the condition of the machine and the operating and process data. As well as complete process stability, this helps the operator get the most out of grinding tools and minimise machining times.
25.02.2020
TYROLIT POWER is a sanding system that uses abrasive strips to prepare surfaces. Particularly industries that need to sand large surfaces such as the manufacturing of wind turbines, aerospace and shipbuilding are profiting from this technology.
17.02.2020
With the new range of X-LOCK-compatible abrasive discs, TYROLIT offers Bosch power-tool users the highest quality in cutting, flap discs as well as grinding discs.
06.02.2020
Innovative core technologies in the field of ceramic bonded CBN grinding tools create competitive advantages, both for TYROLIT and for our customers.
30.12.2019
Resin bonded grinding wheels for HSS tool manufacturing. The new STARTEC ICE assortment was developed together with TYROLIT experts and is dedicated to all HSS precision cutting tool manufacturers. A new approach to development enables results to be achieved in terms of economic efficiency and "cool" grinding that were previously unheard of.
30.12.2019
In September 2019 we updated our grinding app “APPRASIVE” for iOS and Android. The App helps end-users to find products, setup grinding tool and –machine, fine-tune processes and to solve process problems.
04.12.2019
During a heavy autumn storm in September 2018, the ship M/S Osfjord ran aground off the coast of Trøndelag in Norway. After several attempts to salvage the shipwreck were unsuccessful, a TYROLIT saw wire was used to salvage the wreck in pieces.
02.10.2019
The combined expertise and close collaboration of application engineers from TYROLIT and grinding machine manufacturer Schütte has resulted in a sensational jump in productivity. New TYROLIT grinding tools together with the 325 linear multi-functional grinding machine from Schütte have reduced process times by two thirds.
26.07.2019
In a tightly scheduled, large-scale project, the 15/33 runway at Salzburg Airport was refurbished. The concrete runway from the 1960s would remain as the foundation for the new covering layer consisting of 120,000 tons of asphalt.
05.07.2019
To modernise one of the blocks of the Romanian nuclear power plant in Cernavodă, around 400 tons of concrete had to be decommissioned in a controlled manner and under the strictest safety conditions.
08.05.2019
As part of the construction of the new Lancy-Bachet train station in the Swiss city of Geneva, a concrete wall, which had been used to hold back soil during the construction work, needed to be removed.
11.02.2019
With the goal to create a diamond for everyone, Daniel Swarovski laid the cornerstone of his crystal empire in 1895 in Wattens, Austria.
12.12.2018
As part of an offshore decommissioning project for a major U.S. oil company in the Gulf of Mexico, a stub had to be removed within a short time frame in the last quarter of 2018.
11.11.2018
Gaudi's unfinished masterpiece La Sagrada Familia is being built with stone from a Lancashire quarry, property of Armstrongs Group, UK. The stone was cut and profiled using Tyrolit diamond tools.